Features
- Surpass 80 Plus Platinum level
- Continuous 1050W full rated output with 1155W peak power
- Modular cable design with flat peripheral cables simplifies the installation of PSU and cable management
- 135mm ball bearing fan with thermal speed control delivers silent and durable cooling performance
- High density PCB makes PSU only 17.5cm in depth, providing extra room to dissipate the heat inside chassis
- LLC resonant converter topology with Zero Voltage Switch (ZVS) circuitry help PSU achieve high efficiency
- Solid state capacitors and 105°C Japanese grade A capacitors offer great reliability & longer lifespan
- Intel Haswell fully supported by DC to DC converter design, which ensures the stability of output voltage when CPU goes into C6/C7 power states
- Multiple +12V rails with high maximum loads give great compatibility with heavy-duty graphics cards
- Comply with EU 2013 ErP Lot 6 standards (lower than 0.5W power consumption at standby mode)
- System safety assured by comprehensive protection of Over Power, Over Voltage, Under Voltage, Over Current, Over Temperature, and Short-circuit
- ATX12V version 2.4 and EPS12V version 2.92 compliant

105°C Japanese Capacitors

LLC Resonant Converter Topology
achieves high efficiency

DC-to-DC Converter Design
Specifications
Model Number: P1050-MA |
AC Input | Voltage |
100-240VAC, 50-60Hz, 12.4-5A |
DC Output |
+3.3V |
24A |
120W |
+5V |
24A |
+12V1 |
30A |
1044W
(87A) |
+12V2 |
30A |
+12V3 |
30A |
+12V4 |
30A |
-12V |
0.5A |
6W |
+5Vsb |
3A |
15W |
Total Power |
1050W |
Peak Power |
1155W |
PSU Dimension |
175(D) x 150(W) x 86(H) mm |
Protection Circuit
Trigger Range / Status |
Model No. |
P1050-MA |
DC Rail |
+3.3V |
+5V |
+12V1 - V4 |
Over Current Protection |
30-40A |
30-40A |
40-55A |
Over Voltage Protection |
3.7-4.1V |
5.7-6.5V |
13.1-14.5V |
Under Voltage Protection |
2.0-2.4V |
3.3-3.7V |
8.5-9.5V |
Over Power Protection |
112~150% of rated max load |
Over Temperature Protection |
90~120°C at the heat sink |
Short-circuit Protection |
Main output power shall latch into shut down state within 50ms when short circuit applied |
|
Datasheet

Manual

Review
|
Cables & Connectors

Notice:
If you plan to put in 2 or more high end, power demanding GPU cards, please choose the motherboard that comes with extra 4P Molex/ 4P FDD / 6P PCI-E power socket(s) on board and connect them with your power supply. This will prevent the motherboard from overloading and possibly causing damage to your system including your power supply. The damage to the motherboard and the power supply caused by failing to do the above instruction will not be covered under Lepa manufacturer’s warranty. Please refer to your motherboard’s user manual to configure your system properly to prevent damage to your system and your power supply.
|
|